A4 Laser Labels - Specifications

A4 Laser Label specifications

Product Description

Plain white, matt, JETLASER face paper finished on A4 sheets. 500 sheets per box. Suitable for a wide range of printing requirements including Barcodes, Product labels, Storage information, Address labels and much more, especially designed for ink-jet (both single and multicolour) printers, laser printers and photocopiers.

In order to communicate standard label sizes our products are the same size format as the Avery* product references displayed. These references are used because they are uniform size formats most commonly found in everyday software packages.

Face Paper

Internet Labels A4 sheet laser labels face paper is JETLASER wood-free machine finished paper especially designed for ink-jet printers, laser printers and photocopiers as well as flexography, letterpress, offset and screen-print. Please note that conventional printing can compromise ink-jet and laser over-printability.


Internet Labels use a universal acrylic, water borne permanent adhesive on all A4 laser label sheets. Designed for use in a wide range of applications. With a service temperature range of -20°C and +100°C, good adhesion to corrugated board and non-polar substrates even at low temperatures is achieved. The research centre ISEGA has given the adhesive approval for direct contact with dry and moist non fatty foods.

Backing Paper

Internet Labels use Kraft Special backing paper which is a white, wood-free, Kraft backing paper designed for easy peel of the labels from the backing. The backing paper has been developed to provide good lay-flat properties.


*Avery and the Avery product references are the trademarks of the Avery Dennison Group. Internet Labels products are not made or endorsed by the Avery Dennison Group.